Shop

Filter

Motor Driver H-Bridge Module, TB542A1, DC or Stepper

300

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

WiFly RN-171 WiFi 802.11bg SMD Module from Roving Networks

5,500

The RN-171 is a small form factor, ultra-low power embedded TCP/IP module. The RN-171 is a standalone, complete TCP/IP wireless networking module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices.

FlySky FS-i6S Transmitter RC Remote with FS-iA6B Receiver

12,000

This systems width ranges from 2.4055GHz to 2.475GHz. This is divided into 140 channels. Each transmitter hops between 16 channels in order to reduce interference from other transmitters.

Transmitter and Receiver pair for your RC Hobby experiments and projects

Screw Driver Phillips Plus Large, 6x100mm Duobang

250

Simple tool to loosen/tighten screws. Large size with Philips or Plus head, easy to use and in our bright colors. One of the basic tools every maker, tinkerer, inventor should have.

This Screw Driver is included in our TOOL KIT as well, which has a host of other tools to make a complete workstation for any tinkering projects involving electronics, check it out at Ejaad Box Toolkit.

Transformer for Power Supply Projects, 10 to 1 Ratio

425

It is a general-purpose chassis mounting mains transformer. The transformer has 240 V primary windings and
center-tapped secondary winding. The transformer has flying colored insulated connecting leads ( Approx.
100 mm long ). The Transformer act as a step down transformer reducing AC – 240V to AC – 12V.

Solar Charge Controller 12V 10A

900

The solar charge controller can automatically manage the working of solar panels and batteries in a solar system. A solar charge controller is used for protecting the lifespan of your battery.

Dual USB ports, USB Output: 5V/2A max. 12V; Rated Charge & Discharge Current: 10A; Settable operating modes of loads, fully 4-stage PWM charge management.

This Solar Charge Controller is included in our SOLAR KIT as well, which has a complete set of items to make a solar powered lights and fans for your home, school, class or office, check it out at Ejaad Box Solar Kit.

Relay Module for Arduino Raspberry Pi, 4 Channels

300

The Relay Module provides a solution for controlling high current devices that cannot be controlled by the Arduino’s Digital I/O pins due to their current and voltage limits.

The Relay Module features four high quality relays and provides NO/NC interfaces, four dynamic LED indicators to show the on/off state of each relay, and the standardized shield form factor to provide a smooth connection to the Arduino/Seeeduino board or other Arduino compatible boards.